|
All prices are in US Dollars.
MANTIS EX Standard Kit
White painted Carbon-Kevlar Fuselage and belly pan. Contest Balsa sheeted foam wings, stab and rudder. Lite-ply firewall, balsa leading edges and all necessary wooden parts. Stab tube and adjusters Building instructions sheets
$699.00
Mantis EX Basic Kit:
White painted Carbon-Kevlar Fuselage and Belly pan.
Foam cores for wings, stab and rudder. Building instructions sheets
$599.00
Mantis EX Ready To Fly:
Professionally Built Ready to fly Mantis Ex Pattern Plane.
Carbon-Kevlar-Styrofoam-Epoxy fuselage.
Removable
stabilizer.
Painted and Clear-coated in attractive colours. Ultracote on flying
surfaces. All accessories are included. Requires
electronics, engine and engine mount.
$2149.00
Technical Specifications:
Wing Span: 72.5 in. / 1840 mm.
Fuselage Length: 78 in. / 1980 mm.
Fuselage Height: 13 in. / 330 mm.
Fuselage Width: 6 in. / 150 mm.
Engine: Glow 140 - 160 / Electric H5013XL
Weight: 9.3 - 9.9 lbs. / 4.2 - 4.5 kg.
BN MODELS IMPULSE F3A ARC
(Almost Ready to Cover) Kit:
Carbon/Fiberglass, Herex TAVS (Total Area Vacuum Sandwich)
composite fuselage only weight 18oz
(520 gr.). Fuselage comes with the mountings for the adjustable wing and
adjustable stabs ready installed. Extra light
balsa sheeted foam plug in wings, plug in stabs and rudder ready for covering.
Carbon fiber canopy and belly pan fixings installed. Honeycomb formers and
honeycomb servo trays installed. Carbon honeycomb firewall installed. Nose ring
support installed. Carbon gear mounting plate installed and fixed gear struts
are pre-drilled ready for installation. Wing tubes and stab tubes installed.
Wing and stab adjuster mechanism installed. The rear of the fuselage also has
all the required fixings installed for the tail wheel and rudder installation.
Elevator Bell-crank support ready for installation.
$1450.00
Technical Specifications:
Wing Span: 75 in. /
1900 mm.
Length: 78.5 in. / 1995 mm.
Wing Area: 1038 sq. in. / 67 sq. dm.
Airfoil: Symmetrical 0013 -0012
Engine: Glow 140 - 160 / Electric H5013XL
Weight: 9.7 - 10.1 lbs. / 4.4 - 4.6 kg.
Kit Contents:
White gel-coated
Fuselage, carbon belly pan and canopy.
Honeycomb formers, servo trays, firewall.
Foam balsa plug in wings, stabs and rudder.
Carbon landing gear.
Fiberglass ultra light wheel pants.
6061 T6 Aluminum axles.
92 mm carbon spinner with 6061 T6 back plate.
Adjustable ball-bearing elevator bell-crank assembly with carbon pushrod.
Anti-vibration engine mount.
Aluminum nose ring for your requested engine.
Carbon wing and stab tube.
Adjustable wing mechanism.
Adjustable stab mechanism.
Professional tail wheel assembly.
Rudder pull-pull control.
Carbon pushrod set for elevators and ailerons.
UHMW PE (Delrin) control horns.
Plastic hinges.
All screws, bolts, and nuts.
Decal set.
Contact Us
NB Engineering -
Calgary, AB Canada
Copyright © 2002 Nedim Bek
|
